The ‘SHANTA FLAKER & DRYER CO. PVT. LTD.’ offer a Flaker to convert Molten Chemical in to Solid flakes. This is achieved by forming a thin layer of molten product on the outside surface of a rotating drum and causing this to be solidified by spraying cooling water from inside surface of the drum. An adjustable scrapper continuously removes the solidified from the drum surface in flake forms. The material of construction for the drum can be Mild Steel,
Stainless Steel with / with Hard Chrome Plating, normally Monoblock for weldable materials. This construction ensure lifelong alignment, surface will be machined and ground finished. Drum Rotating on antifriction self aligning ball / roller bearing with standard Housing. Heavy duty drive arrangement for smooth, continuous and trouble free running. V-Pulley or Variable speed arrangement also provided for optimum performance. The Flaker Machine will be complete with 1440 RPM, 3 Phase, 415 volts, TEFC / ISD motor, with gear box, Tray, Hopper, M.S. hood, Belt Guard. Machine mounted on heavy base-plate for trouble free service. It’s optional features is Screw Conveyor, Flaker Breaker, Film thickens controllers, Complete enclosure for Hazardous application. Company also providing pilot unit which is available for, to take running trial on receipt of sample about 15 Kgs. Company carries out the test on it, to produce reliable information’s on outputs and for the scaling of purpose. Flaker used in Acetanilide, Fatty acids., Monochloro acetic acid, Nickel catalyst, Naphthalene, Resin, Waxes and so many other products.
|
DIMENSIONS:(mm)
|
600
|
1000
|
1000
|
1000
|
1200
|
1250
|
1500
|
|
LENGTH:(mm)
|
1000
|
1250
|
2000
|
2500
|
2500
|
3000
|
3000
|
|
GROSSAREA:(mm)
|
2.00
|
4.00
|
6.00
|
8.00
|
10.00
|
12.00
|
14.5
|
